1.SkycolorUV printer glass coating:
Suitable for plexiglass, tempered glass, glazed tile, crystal and other glass materials that require special treatment. Currently there are two types: quick-drying coating and baking. It needs to be baked in the oven before printing the pattern.

2.Skycolor UV printer PC coating
Some PC materials are harder materials, usually with poor adhesion! Some PC materials do not require coatings for direct printing! Generally imported PVC acrylic boards need to wipe the PC coating.

3.Skycolor UV printer metal coating
Metal coating: suitable for aluminum, copper plate, tinplate, aluminum alloy and other materials, there are two kinds of transparent and white, need to be used on the finished product, can not be used before stamping, injection molding, otherwise the effect will be greatly reduced.

4.Skycolor UV printer leather coating
It is suitable for leather, leather, pvc leather, pu leather, etc. After spraying on the surface of leather material, just let it dry naturally.

5.Skycolor UV printer ABS coating
It is suitable for wood, PVC, ABS, gypsum, thick kraft paper, acrylic, PSPVC and other materials. After wiping the coating, it can be dried and printed.

6, Skycolor UV printer silicone coating
Suitable for silicone and rubber materials. The surface activity is poor, and the flame treatment is needed, otherwise the adhesion is not enough. The flame treatment is based on experience, and the surface should not be sprayed too thick, otherwise it is not easy to dry.