Printhead is very important for UV printer,which is a high-precision part. If it is damaged, there is no way to repair it. Therefore, attention should be paid to the maintenance and repair in the ordinary use. Many problems of the printhead are caused by the wrong use method and improper maintenance operation. Skycolor UV printer summarized some mistakes in daily use for you,please note that the following things that hurt the nozzle must not be done.
1.Never use poor quality ink and cleaning fluid. Ink is a consumable and has a large usage. In order to save costs, some people use cheap and poor quality ink, do not choose the ink designated by the manufacturer, resulting in irreparable losses such as nozzle blockage, etc. Each manufacturer's ink composition ratio is different, if there is no special case, do not replace it easily.
2.Do not wash the printhead frequently and excessively. Some users worry that the nozzle is blocked and wash the nozzle frequently. This is a wrong way. Frequent cleaning will cause some damage to the nozzle. In case of suspected problems, the manufacturer must be informed to arrange professional technical personnel for disassembly and cleaning.
3.The printhead can be cleaned by soaking the nozzle in the cleaning solution, but it can't be soaked for a long time or the whole printhead. There are many electronic components in the printhead, and the cleaning solution is corrosive to a certain extent. As long as the nozzle part of the printhead is soaked, and time must be controlled within 1-2 hours. When cleaning, the machine must be turned off to avoid short circuit.
4.Bad environment, like too high or too low temperature or relatively wet,has an impact on the service life of the machine components, although it is slight, but it can not be ignored, especially for the fine components such as the printhead. so it is necessary to provide a good production environment for the machine to run stably for a long time.
Therefore, to sum up, the correct use methods and maintenance measures can improve the service life of the nozzle. Some customers have reported that the use time of the printhead does not meet the expectation. Please reflect on whether the machine is used correctly in the production process. If you need to know more about the nozzle, please visit the official website www.skycoloruv.com and we will provide you with professional answers.