The quality of uv acrylic printers sold on the market is uneven, and printer head often burn out during use. So what are the reasons?

1. Ground wire. The main purpose of grounding is to prevent the accumulation of static electricity in skycolor uv acrylic printer itself. Once excessive static electricity is difficult to discharge from printer body, it will cause problems such as burning uv printer head and board cards.

2.Voltage and current overload. This situation often occurs during peak electricity consumption, especially in summer. Please be sure to install a 5000W voltage stabilizer to prevent problems before they occur.

3.Switch skycolor uv acrylic printer frequently. The current at the moment of starting up has an impact on printer itself, and frequent switching on and off will only increase the burden on uv printer head, or even burn it. The recommended interval is five minutes.

4. Print in the state of lack of ink. In the printing process, if the ink is used up,and the ink is not refilled in time, the print head will burn out if the print head is out of ink for a long time. Therefore, if the ink is insufficient, add ink in time!

5. High temperature. The main performance is: long-time overload operation or high room temperature, it is recommended to print at an ambient temperature of 15℃～30℃ and a humidity of 35%～65%.

6.There is ink on the board. The ink used in skycolor uv acrylic printer is corrosive to a certain extent, and dripping on the board will not only cause corrosion, but also cause short circuit and other problems, causing burning problems.

To sum up, everyone must pay attention to the above points when buying or using skycolor uv acrylic printer. After all, the price of the current skycolor uv acrylic printer head is still relatively expensive. In order to save money for you, you must check it carefully before using it to avoid unnecessary losses.