For the uv flatbed glass printer, the use and operation is not complicated, but to keep the uv flatbed glass printer in a stable and optimal working condition, daily maintenance are required. In the process of storage and work, there are often dust, ink stains, and even larger pollutants. Therefore, we should clean and maintain the printer regularly. The following introduces several daily maintenance aspects.

1. Switch machine
The correct switch machine operation provides stable working voltage for the uv flatbed glass printer. Pay attention to shut down and power off before performing related maintenance operations. Do not perform to avoid damage to the machine and accessories due to live operations, and even lead to safety issues such as electric shock.

2. Environment
The suitable working environment of the uv flatbed glass printer is at room temperature of 20-30 degrees. Too low temperature may cause the ink density to increase and the circulation is not smooth. The air needs a certain amount of humidity, which can effectively reduce dust. In addition, pay attention to the damage caused by static electricity to the uv flatbed glass printer. Connect the ground wire to release the static electricity to avoid damaging the print head, the control main board and related electronic components.

3. Clean printer
External structures such as the surface and platform need to be cleaned up in time for impurities such as dust, ink, paper scraps, etc. It will lead to misfeeds, chaotic colors and clogged print heads during the operation of the printer.

4. Ink
In addition to ink addition, regular inspections are also required. You can print test strips every day after starting up, check whether the print head is in good condition, whether there are print quality problems such as disconnection, flying ink, etc., and clean the print head in time to solve it to ensure the print output quality of the uv flatbed glass printer.

5. Print head
Be sure to do the relevant print head moisturizing work. If you know in advance that the uv flatbed glass printer will not be used in the next few days, you can drop an appropriate amount of cleaning fluid on the capping station sponge, put the print head and the car back in place, and then simply clean it after turning it on.

6. Operating system
The inkjet files in the online computer operating system of the uv flatbed glass printer should be organized in time to ensure that the operating system hard disk has enough space for operation. The parameter settings of the computer system and the printing control program of the uv flatbed glass printer cannot be changed at will, especially when reinstalling the system, ensure that the settings are accurately restored and configured.

7. Working hours
It should be noted that uv flatbed glass printer try to avoid continuous printing for too long. The printer will generate very large heat after being used for a long time, and poor heat dissipation will affect the life of the machine. Regardless of the related circuit boards, electronic accessories or related motors, it will be affected.

The user of the uv flatbed glass printer should learn more and develop the habit of regular maintenance, so that the printing machine maintains the best and stable working condition, and further extends the service life of the printer and print head.