With the development of inkjet technology, and the operation of uv printer is not complicated, the figure of Skycolor acrylic uv printer can be seen everywhere in the advertising industry.

Although the operation is simple, how to keep Skycolor acrylic uv printer in the best working condition? This has become a problem for many users.

1. The correct switch printer provides a stable working voltage for Skycolor acrylic uv printer. In the daily operation process, pay attention to shut down and power off before performing related maintenance operations to avoid damage to uv printer and accessories caused by live operation, which will bring you unnecessary trouble.

2.Provide a good working environment for Skycolor acrylic uv printer, which can improve the working efficiency. The working temperature of Skycolor acrylic uv printer should be controlled at 20-35℃. If the indoor temperature is too low, the ink concentration may become higher and the circulation will not be smooth. Only by keeping the temperature at a suitable temperature can the ink activity be maintained. In addition, Skycolor acrylic uv printer also has certain requirements for humidity when it is working. It is recommended to keep it at 35%-65%, because the humidity in the air can reduce dust and give Skycolor acrylic uv printer a good working environment.

3. Check whether the ink in the ink cartridge is sufficient before inkjet printing, add ink in time, and pay attention to adding different colors of ink correctly to avoid mixing of ink. After starting up every day, check whether the print test strips and print heads are in good condition, whether there are any print quality problems such as disconnection, flying ink, etc., and clean the print heads in time to solve them to ensure the printing output quality of Skycolor acrylic uv printer.

4.In the daily cleaning and maintenance operations of Skycolor acrylic uv printer surface, it is necessary to clean up the machine surface, platform and other dust, ink, shredded paper or other impurities in time, because these ordinary impurities may cause unknown failures of Skycolor acrylic uv printer, such as shredded paper and debris on the machine platform will block the flatness of the paper feeding of Skycolor acrylic uv printere, and there will be a problem of deviation of the paper feeding; the residual ink on the edge of printhead will make the white printing paper mixed with other irrelevant ink stains and colors affect the rendering effect.

5. The files of Skycolor acrylic uv printer connected to the computer should be organized in a timely manner, classified and stored picture files, and ensure that the operating system hard disk has enough running space. The parameter settings of the computer system and the printing control program of Skycolor acrylic uv printer cannot be changed, especially when reinstalling the system, ensure that the settings are accurately restored and configured. Pay attention to the influence of computer system antivirus and malicious programs on the RIP output software of Skycolor acrylic uv printer.

6.In the case of continuous printing day and night, Skycolor acrylic uv printer must remember to let printer have a rest time, at least one hour of rest time. Because no matter what kind of printer, it will produce huge heat after using for a long time. If this heat is not released in time, it will have a great impact on the life of acrylic uv printer. Regardless of the circuit board cards, electronic accessories or related motors will be affected.