Why do the same equipment, the same printhead, some users’printheads can be used for a long time, but some users’ printheads are always replaced frequently?

The main reason is whether the user's daily protection and maintenance of the printhead is in place. If the printhead has a long service life and is always in the best working condition, these daily protection and maintenance work must be done.

1. Shut down in accordance with the prescribed procedures: when shutting down, first turn off the control software, and then turn off the main power switch to ensure that the carriage returns to its normal position, to ensure that the printheads and ink stacks are completely closed to avoid clogging the printheads.

2. When replacing the ink stack core, it is recommended to use the original ink stack core, otherwise the ink core may deform and cause printhead clogging, ink breakage, incomplete ink extraction, and unclean ink extraction. If the equipment is not used for more than three days, please clean the ink stack core and waste ink tube with cleaning fluid to prevent dry and clogging.

3. It is recommended that you use the original original ink, and it is strictly forbidden to mix two different brands of ink, so as to avoid chemical reaction, block the printhead, and affect the picture quality.

4. Do not plug or unplug the USB printing cable when powered to avoid damage to the motherboard.

5. The machine is a high-speed printer, please be sure to connect the ground wire: ① When the air is dry, the static electricity problem cannot be ignored. ②When using some inferior materials with strong static electricity, static electricity may cause damage to the machine's electronic originals and printheads. Static electricity will also cause ink flying during printing. It is forbidden to operate the printheads with electricity.

6.Because this equipment is a precision printing device, it is recommended to equip a branded voltage stabilizer with a power of about 2000W.

7.Keep the ambient temperature at 15℃-30℃, humidity 35%-65%, keep the working environment clean and avoid dust.

8.Scraper: Clean the ink stack wiper regularly to prevent ink solidification from causing damage to the print head.

9.Working platform: Keep the table surface free of dust, ink, and debris to prevent the printhead from being scratched.

10. Cartridge: close the lid immediately after filling the ink to prevent dust from entering.

The printhead is the core component of the epson sublimation printer. Do a good job of daily maintenance of the printhead, the equipment can work better and improve production efficiency; at the same time, it can save costs and increase profit margins.

Zhengzhou New Century Digital Technology Co., Ltd (Skycolor UV Printer:www.skycoloruv.com) is a professional high-tech enterprise engaged in R&D, production and sale of skycolor uv flatbed printer,skycolor uv roll to roll printer and related consumables.

Over the years,company has accumulated rich experience in digital uv printing field and gathered a batch of employees with professional skills. With high product quality and standardized service system,company has won high reputation from global market and trust of cooperated units.