Summer is here, because the uv flatbed glass printer emits heat when it is working, some users will turn on the air conditioner, but the indoor temperature becomes lower, which will affect the ink of the uv flatbed glass printer.

Under the influence of temperature, the thinness of uv flatbed glass printer ink will change, which is a physical phenomenon, but what changes is the form, and its essence will not change. When the ink becomes thicker, the viscosity will also increase. However, it is recommended not to pour thinner or varnish into the ink for blending to change its viscosity. Because when users use these ink-based additives, you don't know the total amount of various additives that the ink can hold. It is easy to exceed the amount, which will affect the performance of the ink and affect the print quality.

The solution to the ink thickening phenomenon caused by temperature is as follows:

1. Put the original ink in a warm place and let it heat up slowly to return to its original state.

2. In case of emergency use, it can be heated externally with boiling water. Finally, it is recommended that you keep the working place of the photo machine at about 27°C.