The uv inkjet printer will crash? The crash not only prolongs the construction period, but also causes the mass picture to be invalid, causes the serious consequence to the enterprise. Next, we analyze the causes of the crash and propose solutions.

UV inkjet printer crash means that when printing, suddenly automatically stop printing work. There are usually two kinds of crash, one is complete crash, the other is incomplete crash, complete crash means that the uv inkjet printer suddenly stops printing automatically during the printing process, and incomplete crash means that the printing data is interrupted, but the remote system is still working. In general, the loss and harm caused by incomplete crash to enterprises is greater.

The uv inkjet printer is in a dead state, the whole operating system is chaotic, and the printing machine and software are to be restarted.

UV inkjet printer crashes are usually caused by four factors: software failure, mechanical failure, circuit failure and interference. There may be many reasons for the same uv inkjet printer. Skycolor uv inkjet printer factory reminds the customers should check the reason of crash carefully before we know how to solve it.

The uv inkjet printer should be prevented from being interfered. Normally, the uv inkjet printer is mainly interfered by external interference and internal interference. The internal interference mainly includes data transmission interference and spark interference. Some data cables have poor shielding function, so they are easily susceptible to interference.Therefore, it is necessary to use high-quality data cables. Spark interference is also very strong, and the parts used in the uv inkjet printer sometimes generate sparks, so it will not bring many unpredictable failures to the enterprise.

Mechanical failure is often one of the causes of printer crashes. The failure of the print head motor often causes the machine to crash. Another situation is that the movement track of the print head car is affected by power and resistance. The common inspection method is to remove the motor belt to keep the motor and the print head car separated, and then push the car down by hand. When the movement is not very smooth,you need to replace the slider or track.